Home > TFT LCD Display >

3.5 Inch TFT LCD Display Manufacturer China 320x240 Resolution RGB Interface

Product Categories

TFT LCD Display [164]
TFT LCD Module [113]
TFT LCD Screen [83]
Round TFT LCD [29]
Square TFT Display [29]
Bar Type TFT [46]
HDMI Driver Board [14]
VGA Driver Board [5]
Capacitive Touch Panel [11]
3 Inch LCD [42]
4 Inch LCD [39]
7 Inch LCD Module [41]
10 Inch LCD Module [25]

Shenzhen Tianxianwei Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

3.5 Inch TFT LCD Display Manufacturer China 320x240 Resolution RGB Interface

Ask Lasest Price
Brand Name :	TXWEI
Model Number :	TXW350125N0
Certification :	CE ROHS FCC
Delivery Time :	16
Supply Ability :	10000pcs

Add to Cart

Product Details
Company Profile

3.5 Inch TFT LCD Display Manufacturer China 320x240 Resolution RGB Interface

3.5 Inch TFT LCD Display 320x240 RGB Interface Product Introduction

Product Quick Review

Model No. TXW350125N0
Resolution : 320×240 dots
View Direction : ALL O’CLOCK
Controller IC:ST7272A
Brightness (cd/m²): 1000
Touch Panel : without(customizable)

Description

TXW350125N0 is a 3.5-inch TFT-LCD display with a resolution of 320x240 pixels and a brightness of 1000cd/m ². This module uses the ST7272A controller IC that supports RGB interfaces. The module size of the monitor is 76.66 * 63.62 * 3.25mm, with an effective area of 70.08 * 52.56 mm. Its simulated power supply voltage range is 18V

This display module uses a TN screen with a full view angle. The TXW350125N0 module can operate within a temperature range of -30 ° C to+85 ° C; Its storage temperature range is -40 ° C to+90 ° C.

3.5 Inch TFT LCD Display 320x240 RGB Interface Product Drawing

Module Function Description

Pin No.	Symbol	Functional
1	LED_K	Power supply for backlight cathode input terminal.
2	LED_K	Power supply for backlight cathode input terminal.
3	LED_A	Power supply for backlight anode input terminal.
4	LED_A	Power supply for backlight anode input terminal.
5	NC	No Connection.
6	NC	No Connection.
7	NC	No Connection.
8	RSTB	Reset signal input terminal. Active at ‘L’.
9	SPENB	3-Wire Communication Enable.
10	SPCK	3-Wire Communication Clock input. Rising edge latch.
11	SPDA	3-Wire Communication Data input/output.
12	B0	Blue data
13	B1	Blue data
14	B2	Blue data
15	B3	Blue data
16	B4	Blue data
17	B5	Blue data
18	B6	Blue data
19	B7	Blue data
20	G0	Green data
21	G1	Green data
22	G2	Green data
23	G3	Green data
24	G4	Green data
25	G5	Green data
26	G6	Green data

27	G7	Green data
28	R0	Blue data
29	R1	Blue data
30	R2	Blue data
31	R3	Blue data
32	R4	Blue data
33	R5	Blue data
34	R6	Blue data
35	R7	Blue data
36	HSD	Horizontal sync. Signal in RGB I/F
37	VSD	Vertical sync. Signal in RGB I/F
38	CLKIN	Dot clock signal for RGB interface operation.
39	NC	No Connection
40	NC	No Connection
41	VDD	Power Supply For LCD.
42	VDD	Power Supply For LCD.
43	NC	No Connection.
44	NC	No Connection.
45	NC	No Connection.
46	NC	No Connection.
47	NC	No Connection.
48	NC	No Connection.
49	NC	No Connection.
50	NC	No Connection.
51	NC	No Connection.
52	DEN	Data enable signal in RGB I/F mode 1
53	GND	Power Ground
54	GND	Power Ground

Absolute Maximum Rating

Characteristics	Symbol	Min.	Max.	Unit
LCM Operating Temperature	T_OPR	-30	+85	°C
LCM Storage Temperature	T_STG	-40	+90	°C
Humidity	RH	--	90	%

Back-Light Unit Characeristics

The back-light system is an edge-lighting type with 18 white LEDs. The characteristics of the back-light are shown in the following tables.

Characteristics	Symbol	Min.	Type	Max.	Unit	Notes
Forward Voltage	V_F	16.8	--	19.2	V	--
Forward current	I_F	--	60	--	mA	--
Luminance(With LCD)	Lv	--	1000	--	cd/m²	--
LED life time	N/A	--	30,000	--	Hr	Note 1

Note:

The “LED life time” is defined as the module brightness decrease to 50% of original brightness at I_L=20mA/LED. The LED life time could be decreased if operating I_L is larger than 25mA/LED.

Optical Specification

Note (1)Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expressionContrast Ratio (CR)=L255/L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR= CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5)

Reliability Test Item

No.	Test Item	Test Condition	Notes
1	High Temp. Storage	+90°C / 96H	1. Functional test isOK. Missing Segment,short, unclear segment non-display,display abnormally and liquid crystal leakare un-allowed. 2. No low temperature bubbles,end seal loose andfall, frame rainbow.
2	Low Temp. Storage	-40°C / 96H
3	High Tempe. Operating	+85°C / 96H
4	Low Tempe. Operating	-30°C / 96H
5	High Temperature /Humidity storage	60°C x 90%RH /96H
6	Thermal and cold shock	Static state, -30℃(30min) ~85℃ (30min),10 cycles

3.5 Inch TFT LCD Display 320x240 RGB Interface Product Image

Factory Facilities and Certificates

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Tianxianwei Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!